256 Logic Works RPTwin Version 3.01 [Build 101] **
257 The page margins are larger than the paper size. Please reduce them. The paper size has been adjusted until this is corrected.
258 Start New Page Before Band is Printed
259 Start New Page After Band is Printed
260 Reset Page Number Before Band is Printed
261 Reset Page Number After Band is Printed
262 Don't Allow Page Break Inside Band
263 Replace Page Header with this Band
264 Replace Page Footer with this Band
265 Band - Report Header
266 Band - Page Header
267 Band - Group Header
268 Band - Detail
269 Band - Group Footer
270 Band - Page Footer
271 Band - Report Footer
272 vdata
273 Dataset (*.lwd)|*.lwd|All Files (*.*)|*.*||
274 RPTwin Dataset|.lwd|All Files|****||
275 Select Data File For Report
276 Report (*.lwr)|*.lwr|All Files (*.*)|*.*||
277 RPTwin Report|.lwr|All Files|****||
278 Delete this Label?
279 Grand total:
280 "Subtotal for " & %1 & ": "
281 Sum(%1)
299 One or more of the "calculated columns" in your DataSet has a different name from the column name(s) expected by this report. A probable match has been found for all cases. Do you want the report to be changed according to these probable matches?
307 [buildpreview("%s","%s")]
308 [buildprint("%s","%s",%d,%d)]
309 [buildquickpreview(%d,"%s")]
310 [buildquickprint(%d,"%s",%d,%d)]
311 close
312 exit
313 newopen
314 open
315 preview
316 print
317 setfield
318 Unknown DDE command.
319 DDE command is missing left bracket '['.
320 DDE command is missing right bracket ']'.
321 DDE command is missing right parenthesis ')'.
322 DDE close command found no open documents
323 DDE preview command found no open documents
324 DDE print command found no open documents
325 DDE setvalue command found no open documents
326 showwindow
327 DDE command has too few arguments.
328 DDE command has too many arguments.
329 Deleting these bands will also delete all fields in them. Continue anyway?
330 RPTwin Field Data\nsome RPTwin field data
331 msgDragLBoxItem
332 Bad or missing Group-break expression.
333 A zero value is not allowed for the %1 field
334 Function takes %d parameter%s.
335 Cannot convert %s to %s.\n
336 Group-break expression \"%1\" could not be evaluated in the current dataset.
337 The time limit on this demo copy\nof RPTwin expired on\n\n %1\n\nTo order RPTwin, contact:\n\n Logic Works, Inc.\n 1-800-78-ERWIN\n
338 Failed to connect to CLEAR:Access
339 Failed to launch CLEAR:Access using command:\n\"%1\"
340 Field names can only contain characters 'a' - 'z', '0' - '9' and underscore (_).
341 Improper data in RPTWIN.INI mailing label entry "%1".
342 Could not open the report file.
343 Failed to create object. Make sure the object is entered in the system registry.
344 The field name "%1" is already being used in this report.
345 An improperly formated number was encountered in the LWR file.
346 Error reading script file.
347 Invalid font number.
348 %s (File position: %ld)
349 Right brace is missing corresponding left brace.
350 Left brace is missing corresponding right brace.
351 The OLE object within the LWR file is corrupted.
352 Opening brace '{' is missing.
353 \n\nProceed anyway?
354 This report file contains some information that cannot be used by this version of RPTwin.
355 Improper context for command "\%1".
356 Not a valid RPTwin Report file.
357 There is no data in your DataSet.
358 None of the rows in your DataSet match the Filter you have applied.
359 There is no field named "%1" in this report layout (%2), and so CLEAR:Access cannot pass its associated value.
360 The current printer does not support landscape, but this report is set for landscape. Print anyway?
361 OLE 2.0 initialization failed. Make sure that the OLE libraries are the correct version.
362 The current printer does not support the paper size specified for this report. Print anyway?
363 Height Property not selected
364 20,1,0,0,0,Times New Roman
365 20,1,1,0,0,Times New Roman
366 20,1,0,1,0,Times New Roman
367 28,1,1,0,0,Times New Roman
368 20,1,1,0,1,Times New Roman
369 20,1,0,0,0,Times New Roman
370 16,2,0,0,0,Arial
371 20,1,0,0,0,Times New Roman
372 20,1,1,0,0,Times New Roman
373 20,1,0,1,0,Times New Roman
374 28,1,1,0,0,Times New Roman
375 Count()
376 Date()
377 "Enter Formula Here"
378 PageNum()
379 RecNum()
380 Time()
381 RPTwin Report
382 GREYSORTDOWNARROW
383 GREYSORTUPARROW
384 Grid divisions from %d to %d will operate but cannot be shown.
385 Footer will be removed from the report
386 Header will be removed from the report
387 Header and Footer will be removed from the report
388 RPTwin - Guided Report
389 "Automatic" mailing labels are not an option. Choose "Guided" mailing labels or another report type.
390 The height of your selected label has a limit of %d lines in the current font and size. ( If you need more lines, proceed to the design screen and make adjustments )
391 Please select a Custom Label
392 Please Enter the Height
393 Please enter the %1
394 Please Select a Standard Label
395 Please Enter the Width
397 Data Field Properties...
398 Field Properties...
399 OLE Object Properties...
400 Text Field Properties...
401 Crosstab Properties...
402 Modify Custom Label Setup:
403 New Custom Label Setup:
404 Cancelled
405 No data is available to print or preview.
406 The number, names and/or types of columns in the dataset differ from those with which the report was designed.\n\nSome fields on the report may not evaluate properly until they are changed to work with the new dataset.
407 This feature hasn't been implemented yet.
408 No special options for this band
409 Choose OK to strip of the drive letter and directory names from the DataSet Name
410 One moment please...
411 If you want to make this DataSet change permanent for this report, you must click the "Link" button.
412 Error Selecting Dataset
413 You will not be able to print or preview this report until you choose a valid DataSet.
414 An I/O error has occurred while writing the temporary print preview file. You may view pages that were composed.
415 There is no more room on the disk for the temporary print preview file. You may still view pages already composed.
416 A file error occurred preparing to preview the document. Preview is not possible.
417 Sort canceled.
418 Sorting the data (Ctrl-C to cancel the sort)...
419 $RESULTS
420 Your Text Here
421 Toggle &Units to Centimeters
422 Toggle &Units to Inches
423 Value of Formula must be True of False
424 Warning
425 20,2,0,0,0,Arial
426 20,2,0,1,0,Arial
427 Crosstab
428 Composing report page number: %1 (Ctrl-C to cancel)
429 Failed to load the Logic Works RPTwin Engine object.\n(Error code = %1)
430 The maximum size of a band was exceeded while creating the report. Excess fields were not placed on the band.
431 Problem in requested Filter expression. %1.
432 Problem in requested Sorting or Grouping expression. %1.
433 The DataSet required by this report (%1) cannot be found.
434 The combined size of the report's page header and page footer is larger than the paper being used. The report cannot be rendered.
436 Crosstab Setup Error
441 Changing Page Orientation or Paper Size in the Print Setup dialog will only affect new reports. To change Orientation or Paper Size for a report that is already open, use Page Layout on the Layout menu.
446 Unable to process report. DataSet may be incompatible with this report layout.
447 No more system resources are available.
448 This report is set up for a paper size that is not supported by the current printer. Change the report's paper size by using Page Layout on the Layout menu, or change the current Printer by using Print Setup on the File menu.
449 Composing report page number: %1
701 Letter 8.5 x 11 in
702 Letter Small 8.5 x 11 in
703 Tabloid 11 x 17 in
704 Ledger 17 x 11 in
705 Legal 8.5 x 14 in
706 Statement 5.5 x 8.5 in
707 Executive 7.25 x 10.5 in
708 A3 297 x 420 mm
709 A4 210 x 297 mm
710 A4 Small 210 x 297 mm
711 A5 148 x 210 mm
712 B4 257 x 364
713 B5 182 x 257 mm
714 Folio 8.5 x 13 in
715 Quarto 215 x 275 mm
716 10 x 14 in
717 11 x 17 in
718 Note 8.5 x 11 in
719 Envelope #9 3 7/8 x 8 7/8
720 Envelope #10 4 1/8 x 9 1/2
721 Envelope #11 4 1/2 x 10 3/8
722 Envelope #12 4.5 x 11
723 Envelope #14 5 x 11.5
727 Envelope DL 110 x 220 mm
728 Envelope C5 162 x 229 mm
737 Envelope Monarch 3 7/8 x 7 1/2 in
750 Letter Extra 9.5 x 12 in
751 Legal Extra 9.5 x 15 in
752 Tabloid Extra 11.69 x 18 in
753 A4 Extra 236 x 322 mm
754 Letter Transverse 11 x 8.5 in
755 A4 Transverse 297 x 210 mm
756 Letter Extra Transverse 12 x 9.5 in
757 SuperA/SuperA/A4 227 x 356 mm
758 SuperB/SuperB/A3 305 x 487 mm
759 Letter Plus 8.5 x 12.69 in
760 A4 Plus 210 x 330 mm
761 A5 Transverse 148 x 210 mm
762 B5 Transverse 182 x 257 mm
763 A3 Extra 322 x 445 mm
764 A5 Extra 174 x 235 mm
765 B5 Extra 201 x 276 mm
766 A2 420 x 594 mm
767 A3 Transverse 297 x 420 mm
768 A3 Extra Transverse 322 x 445 mm
956 User Defined...
3000 ReportSum ( NUMBER? )
3001 ReportMin ( NUMBER? )
3002 ReportMax ( NUMBER? )
3003 ReportAvg ( NUMBER? )
3004 ReportCount ()
3005 ReportCumSum ( NUMBER? )
3006 ReportCumMin ( NUMBER? )
3007 ReportCumMax ( NUMBER? )
3008 ReportCumAvg ( NUMBER? )
3009 GroupSum ( NUMBER? )
3010 GroupMin ( NUMBER? )
3011 GroupMax ( NUMBER? )
3012 GroupAvg ( NUMBER? )
3013 GroupCount ()
3014 Sum ( NUMBER? )
3015 Min ( NUMBER? )
3016 Max ( NUMBER? )
3017 Avg ( NUMBER? )
3018 Count ()
3019 If TEST? Then EXPR? Else EXPR?
3020 GroupSum ( GROUP?, NUMBER? )
3021 GroupMin ( GROUP?, NUMBER? )
3022 GroupMax ( GROUP?, NUMBER? )
3023 GroupAvg ( GROUP?, NUMBER? )
3024 GroupCount ( GROUP? )
3025 <Error in formula>
6001 JANUARY
6002 FEBRUARY
6003 MARCH
6004 APRIL
6005 MAY
6006 JUNE
6007 JULY
6008 AUGUST
6009 SEPTEMBER
6010 OCTOBER
6011 NOVEMBER
6012 DECEMBER
6013 BADMONT
6014 January
6015 February
6016 March
6017 April
6018 May
6019 June
6020 July
6021 August
6022 September
6023 October
6024 November
6025 December
6026 Badmonth
6027 january
6028 february
6029 march
6030 april
6031 may
6032 june
6033 july
6034 august
6035 september
6036 october
6037 november
6038 december
6039 badmonth
6040 SUNDAY
6041 MONDAY
6042 TUESDAY
6043 WEDNESDAY
6044 THURSDAY
6045 FRIDAY
6046 SATURDAY
6047 BADDAY
6048 sunday
6049 monday
6050 tuesday
6051 wednesday
6052 thursday
6053 friday
6054 saturday
6055 badday
6056 Sunday
6057 Monday
6058 Tuesday
6059 Wednesday
6060 Thursday
6061 Friday
6062 Saturday
6063 BadDay
6064 SUN
6065 MON
6066 TUE
6067 WED
6068 THU
6069 FRI
6070 SAT
6071 BAD
6072 sun
6073 mon
6074 tue
6075 wed
6076 thu
6077 fri
6078 sat
6079 bad
6080 Sun
6081 Mon
6082 Tue
6083 Wed
6084 Thu
6085 Fri
6086 Sat
6087 Bad
6088 JAN
6089 FEB
6090 MAR
6091 APR
6092 MAY
6093 JUN
6094 JUL
6095 AUG
6096 SEP
6097 OCT
6098 NOV
6099 DEC
6100 BAD
6101 Jan
6102 Feb
6103 Mar
6104 Apr
6105 May
6106 Jun
6107 Jul
6108 Aug
6109 Sep
6110 Oct
6111 Nov
6112 Dec
6113 Bad
6114 jan
6115 feb
6116 mar
6117 apr
6118 may
6119 jun
6120 jul
6121 aug
6122 sep
6123 oct
6124 nov
6125 dec
6126 bad
32800 Align field baselines
32801 Align field bottom edges
32802 Align field left edges
32803 Align field right edges
32804 Align field top edges
32806 Changes the font of the selection\nFont
32807 Changes the font size of the selection\nFont Size
32809 Edit report formulas
32810 Reset selected object to actual size
32811 Select all fields in the current report
32812 Edit the crosstab definition
32815 Modify field properties
32816 Enable or disable snapping objects to grid\nToggle Snap Grid
32817 Create or modify report sorting or grouping
32818 Set layout options
32819 Set page layout
32820 Create or remove page footer
32821 Create or remove page header
32822 Create or remove report footer
32823 Create or remove report header
32824 Edit current DataSet name
32825 Edit the filter expression
32826 Edit layout options for current report
32827 Edit report preferences
32828 View first page of report\nFirst Page
32829 View last page of report\nLast Page
32830 View one page when zoomed out\nView One Page
32831 View two pages when zoomed out\nView Two Pages
32832 Edit properties of current band
32834 Edit properties of the current data field
32835 Edit properties of the current object field
32836 Edit report properties
32837 Edit properties of current text field
32838 Edit properties of the current crosstab field
32839 Show or hide the DataSet columns list
32840 Show or hide the ruler in current view
32841 Show or hide the tool box
33000 Set bold text style\nBold
33001 Set italic text style\nItalic
33002 Set underline text style\nUnderline
33003 Set double underline text style\nDouble Underline
33004 Left align text\nLeft Align
33005 Center the text horizontally\nCenter Align
33006 Right align text\nRight Align
33007 Justify text\nJustify
33010 Select mode\nSelect Tool
33011 Create a literal text field\nCreate Text Field
33012 Create a formula field\nCreate Formula
33013 Create a page break field\nCreate Page Break
33014 Create a time formula field\nCreate Time Field
33015 Create a date formula field\nCreate Date Field
33016 Create a page number formula field\nCreate Page Number
33017 Create a record number formula field\nCreate Record Number
33018 Create a field showing record count in group\nCount in Group
33019 Create a OLE object field\nCreate OLE Object
33020 Create a crosstab field\nCreate Crosstab
57344 Logic Works RPTwin
57345
57346 Select an object on which to get Help
57600 Create a new report\nCreate Report
57601 Open an existing report\nOpen Report
57602 Close the active report
57603 Save the active report\nSave Report
57604 Save the active report with a new name
57605 Change the printing options
57606 Change the printer and printing options
57607 Print the active document\nPrint Report
57609 Preview the report\nPreview Report
57616 Open this report
57617 Open this report
57618 Open this report
57619 Open this report
57632 Erase the selection
57633 Erase everything
57634 Copy the selection and put it on the Clipboard
57635 Cut the selection and put it on the Clipboard
57636 Find the specified text
57637 Insert Clipboard contents
57638 Insert Clipboard contents and a link to its source
57639 Inserts Clipboard contents as a linked object,embedded object, or other format
57640 Repeat the last action
57641 Replace specific text with different text
57642 Select the entire document
57643 Undo the last action
57644 Redo the previously undone action
57648 Open another window for the active document
57649 Arrange icons at the bottom of the window
57650 Arrange windows so they overlap
57651 Arrange windows as non-overlapping tiles
57652 Arrange windows as non-overlapping tiles
57653 Split the active window into panes
57664 Display program information, version number and copyright
57665 Quit the application; prompts to save documents
57666 List Logic Works RPTwin Help topics
57668 Display instructions about how to use help
57669 Display help for clicked on buttons, menus and windows
57670 Display help for current task or command
57680 Switch to the next window pane
57681 Switch back to the previous window pane
57856 Insert new embedded object
57857 Edit linked objects
57872 Activate embedded or linked object
58112 Leave print preview mode\nExit Preview
58114 View next page of report\nNext Page
58115 View previous page of report\nPrevious Page
58116 Print the report\nPrint Report
58117 Zoom in\nZoom In
58118 Zoom out\nZoom Out
59136 EXT
59137 CAP
59138 NUM
59139 SCRL
59140 OVR
59141 REC
59392 Show or hide the toolbar
59393 Show or hide the status bar
61184 Change the window size
61185 Change the window position
61186 Reduce the window to an icon
61187 Enlarge the window to full size
61188 Switch to the next document window
61189 Switch to the previous document window
61190 Close the active window and prompts to save the documents
61202 Restore the window to normal size
61203 Activate Task List
61215 Activate this window
61216 Crosstab Summary Field Properties
61217 Crosstab Field Properties
61218 of
61219 You must select at least one Summary Data Item
61220 Simple
61221 Shaded Alternate Rows
61222 Invalid LWR file
61223 Average
61224 Count
61225 Minimum
61226 Maximum
61227 Sum
61228 OLE Error: 0x%08X
61229 Unknown Error: Internal problem
61230 You have placed this crosstab in a Detail band. Crosstabs are usually placed in Report Headers or Footers, where they summarize data for the entire report or group. In the Detail band, the crosstab will include only one row of data.
